ZINC diecast Fitting

90 Deg Angle Squeeze Connector ( With & Without ) Insulated Throat

Specification:

90° Squeeze Box Connectors Insulated Throat - Zinc Die Cast - 90° Squeeze Box Connectors are Used with a locknut to Terminate Steel or Aluminum Flexible Metal Conduit, Armored Cable & MC to an enclosure 90° Squeeze Box Connectors Insulated Throat features include: Used with a locknut to Terminate Steel or Aluminum Flexible Metal Conduit, Armored Cable & MC to enclosure

  • Assembled with Zinc Die Cast Locknut & Combo Screws
  • Insulated Throat
  • Zinc Die Cast
SIZE : 3/8" | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 3-1/2" | 4"

90 Degree Liquid Tight Connector ( With & Without ) Insulated Throat

Specification:

Liquid Tight Connectors - 90° - Insulated Throat Zinc Die Cast - Liquid Tight Connectors - 90° are Used to join Liquid Tight Conduit to an Enclosure 90° Liquid Tight Connectors - Insulated Throat - Zinc Die Cast features include:

  • 90° Orientation
  • Terminate and Seal Liquid-tight Flexible Metal Core Conduit to either Oil-tight, Liquid-tight or Rain-tight Box or Enclosure
  • Connectors can be used with Tapered Threaded Female Entry or Unthreaded KO using the Sealing Washer and Locknut
  • Insulated Throat
  • Zinc Die Cast
SIZE : 3/8" | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 3-1/2" | 4"

Angle Set Screw Connector

Specification:

Flex Angled Set Screw Box Connectors - Zinc Die Cast - Flex Angled Set Screw Box Connectors - are Used To Connect Flexible Metal Conduit To a Steel Box Flex Angled Set Screw Box Connectors - Zinc Die Cast features include:

  • Use to connect Steel or Aluminum Flexible Metallic Conduit to a Steel Box or other Metal Enclosure
  • Angled Combo Head Set Screw for Easy Access
  • Furnished with Die Cast Zinc locknuts
  • Die Cast Zinc
SIZE : 3/8" | 1/2" | 3/4"

Bx Connector

Specification:
  • BX/Flex Set Screw Box Connectors - Zinc Die Cast - BX/Flex Set Screw Box Connectors - Zinc Die Cast are Used To Connect 14/2 BX To a Steel Box
  • BX/Flex Set Screw Box Connectors - Zinc Die Cast features include:
    • Use to connect 14/2 BX cable to a Steel Box or other Metal Enclosure
    • Suitable for #14-2 Steel armored cable
    • 3/8" size - fits 1/2" Knockout
    • Combo Head Set Screws
    • Assembled with Zinc Die Cast Locknut
    • Zinc Die Cast
SIZE : 3/8"

Combination Coupling

Specification:

EMT to Flex Combination Coupling - Squeeze Type - Zinc Die Cast - EMT to Flex Combination Coupling are Used to join EMT Conduit to Flexible Metal Conduit

EMT to Flex Combination Coupling - Squeeze Type - Zinc Die Cast features include:

  • Use to join EMT Conduit to Flexible Metal Conduit
  • They allow a quick connection between different conduits to create one continuous raceway
  • Their smooth interior surface ensures a snag free wire pull every time
  • Zinc Die Cast
  • Pre-set and staked Robertson Combo head screws
SIZE : 1/2 “ | 3/4" | 1"

Conduit Bushing ( With & Without) Insulated Throat

Specification:

Conduit Bushings with Insulated Throat Zinc Die Cast - Conduit Bushings are Used with a Locknut to Terminate Threaded Rigid and IMC Conduit to a Box or Enclosure.

Conduit Bushings with Insulated Throat Zinc Die Cast features include:

  • Used with a locknut to terminate threaded Rigid and IMC conduit to a box or enclosure
  • Bushings rounded surface prevents damage to wire insulation during pulling
  • Insulated Throat
  • Zinc Die Cast
SIZE : 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 3-1/2" | 4"

Conduit Nipple ( With & Without ) Insulated Throat

Specification:

Rigid Nipples with Insulated Throat Zinc Die Cast - Rigid Nipples are Used with Rigid Coupling to Terminate Threaded Conduit to a Knockout, Box or Enclosure, where space is limited within the box.

Rigid Nipples with Insulated Throat features include:

  • Use with Rigid Coupling to Terminate Threaded Conduit to a Knockout, Box or Enclosure, where space is limited within the box
  • Use with a Locknut to provide a Short Raceway between Boxes and enclosures
  • Insulated Throat
  • Die Cast Zinc
SIZE : 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 3-1/2" | 4"

Corner Elbow

Specification:

EMT to EMT Inside Corner Pulling Elbows - Set Screw - Zinc Die Cast - EMT to EMT Inside Corner Pulling Elbows are Used To connect EMT conduit to EMT Conduit where Right Angle is Required

EMT to EMT Inside Corner Set Screw Pulling Elbows features include:

  • Use to Connect EMT Conduit together on a 90°: Inside Corner
  • Combo Head Set Screws
  • Set Screw Style
SIZE : 1/2" | 3/4" | 1"

Duplex Connector

Specification:

Flex Duplex Box Connectors - Zinc Die Cast - Flex Duplex Box Connectors are Used To Connect two pieces of Flexible Metallic Conduit, AC, MC, or NM sheathed cable to a steel box or other metal enclosure when using only one knockout opening

Flex Duplex Box Connectors - Zinc Die Cast features include:

  • Use to connect two pieces of Flexible Metallic Conduit, AC, MC, or NM sheathed cable to a steel box or other metal enclosure when using only one knockout opening:
    • 14/2 Thru 12/3 NM
    • 14/2 Thru 10/4 AC
    • 14/2 Thru 10/3 MC
    • 3/8" FMC
  • 3/8" size fits 1/2" knockout
  • 1 Screw or 2 Screw design
  • Combo Head Screws
  • Zinc Die Cast
SIZE : 3/8"( 1 Screw & 2 Screw)

Emt Compression Connector ( With & Without ) Insulated Throat

Specification:

EMT Compression Connectors with Insulated Throat - Zinc Die Cast - EMT Compression Connectors are Used To Secure EMT Conduit in an Enclosure.

EMT Compression Connectors - Zinc Die Cast - Insulated Throat features include:

  • To secure and terminate EMT to knockouts in concrete tight box, dry or damp location applications
  • Concrete Tight
  • Male NPS Hub Thread
  • Die Cast Zinc
SIZE : 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 3-1/2" | 4"

Emt Compression Coupling

Specification:

EMT Compression Couplings - Zinc Die Cast - EMT Compression Couplings are Used To Secure EMT Conduit to EMT Conduit.

EMT Compression Couplings - Zinc Die Cast features include:

  • Use to connect EMT Conduit to EMT Conduit for concrete tight, dry or damp location applications
  • Concrete Tight (When Taped)
  • Female NPS Thread
  • Die Cast Zinc
SIZE : 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 3-1/2" | 4"

Emt Set-Screw Connector ( With & Without ) Insulated Throat

Specification:

EMT Set Screw Connectors with Insulated Throat - Zinc Die Cast - EMT Set Screw Connectors are Used To Secure EMT Conduit in an Enclosure.

EMT Set Screw Connectors with Insulated Throat - Zinc Die Cast features include:

  • Use to connect EMT Conduit to Steel Outlet Box, Load Center, or other Metal Enclosures
  • Insulated Throat
  • Concrete Tight (When Taped)
  • Pre-Set/Pre-Staked Combo Head Set-Screws
  • Male NPS Hub Thread
  • Die Cast Zinc
SIZE : 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 3-1/2" | 4"

Emt Set-Screw Coupling

Specification:

EMT Set Screw Couplings - Zinc Die Cast - EMT Set Screw Couplings are Used To Secure EMT Conduit to EMT Conduit.

EMT Set Screw Couplings - Zinc Die Cast features include:

  • Use to connect EMT Conduit to EMT Conduit
  • Concrete Tight (When Taped)
  • Pre-Set/Pre-Staked Combo Head Set-Screws
  • Die Cast Zinc
SIZE : 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 3-1/2" | 4"

Emt-Box Offset Connector Compression Type

Specification:

EMT to Box Offset Compression Connector - Zinc Die Cast - EMT to Box Offset Compression Connector are Used To connect EMT conduit to a Metal Box or Enclosure where Offset is Required

EMT to Box Offset Compression Connector - Zinc Die Cast features include:

  • Use to connect EMT conduit to a Metal Box or Enclosure where Offset is Required
  • Compression Style
  • Assembled with Zinc Die Cast Locknut
  • Concrete Tight (When Taped)
  • Die Cast Zinc
SIZE : 1/2" | 3/4"

Emt-Box Offset Connector Set Screw Type

Specification:

EMT Set Screw Couplings - Zinc Die Cast - EMT Set Screw Couplings are Used To Secure EMT Conduit to EMT Conduit.

EMT Set Screw Couplings - Zinc Die Cast features include:

  • Use to connect EMT Conduit to EMT Conduit
  • Concrete Tight (When Taped)
  • Pre-Set/Pre-Staked Combo Head Set-Screws
  • Die Cast Zinc
SIZE : 1/2" | 3/4" | 1"

Insulated Grounding Bushing With Lay In Lugs Assy

Specification:

Conduit Bushings with Ground Lug and Insulated Throat - Zinc Die Cast - Conduit Bushings are Used with a Locknut to Terminate Threaded Rigid and IMC Conduit to a Box or Enclosure and Connect to Ground Electrode.

Grounding Bushing with Insulated Throat with Aluminum Ground Lug - Zinc Die Cast features include:

  • Used with a locknut to terminate threaded Rigid and IMC conduit to a box or enclosure
  • Lug provides for bonding jumper to a neutral bus bar
  • Thermoplastic liner prevents damage to wire insulation
  • Set-screw provided with each fitting locks bushing in any desired position
  • Resists corrosion, chemicals, and temperature extremes
  • Die Cast Zinc
SIZE : 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 3-1/2" | 4"

Lock Nut

Specification:

Locknuts - Zinc Die Cast - Locknuts are Used To Secure Conduit in an Enclosure.

Locknuts - Zinc Die Cast features include:

  • Conduit locknuts for securing threaded conduit or connectors with tapered or straight thread, to a knockout or unthreaded slip hole
  • Zinc Die Cast
SIZE : 1/2" | 3/4" | 1"

Offset Nipple With-Without Insulated Throat

Specification:

Rigid Offset Nipples - Zinc Die Cast - Rigid Offset Nipples are Used To Offset the Axis of Raceways.

Rigid Offset Nipples features include:

  • Use as an Offset Connector between Two Enclosures
  • Use To Offset the Axis of Raceways 3/4"
  • Die Cast Zinc
SIZE : 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3"

Pull Elbow Emt To Emt With-Without Gasket

Specification:

EMT to EMT Pulling Elbows - Set Screw - Zinc Die Cast - EMT to EMT Pulling Elbows are Used To connect EMT conduit to EMT Conduit at Right Angle

EMT to EMT Set Screw Pulling Elbows - Zinc Die Cast features include:

  • Used To connect EMT conduit to EMT Conduit at 90° bend
  • Removable Aluminum Cover and Neoprene Gasket facilitates wire pulling
  • Combo Head Set Screws
  • Zinc Die Cast
SIZE : 1/2" | 3/4" | 1" | 1-1/4"

Pull Elbow Emt-Rigid To Box With-Without Gasket

Specification:

EMT/Rigid to Box Combination Pulling Elbows - Set Screw - Zinc Die Cast - EMT/Rigid to Box Combination Pulling Elbows are Used To connect EMT conduit to Enclosures at Right Angle

EMT/Rigid to Box Combination Pulling Elbows - Set Screw - Zinc Die Cast features include:

  • Used to Connect a run of EMT, Threaded Rigid or IMC conduit to a Box at a 90° Bend
  • Removable Aluminum Cover and Neoprene Gasket facilitates wire pulling
  • Threaded and Set Screw Conduit Entrance
  • Combo Head Set Screws
  • Assembled with Zinc Die Cast Locknut
  • Zinc Die Cast
SIZE : 1/2" | 3/4" | 1"

Pull Elbow Rigid To Rigid With-Without Gasket

Specification:

Rigid to Rigid Pull Elbows Zinc Die Cast - Rigid to Rigid Pull Elbows used in Tight Areas to Connect 2 Sections of Rigid or IMC Conduit where Full Size Elbows are Too Large.

Rigid to Rigid Pull Elbows Zinc Die Cast features include:

  • For use as a Wire Pulling Elbow to Facilitate Wire Pulling on a Sharp Bend in run of Threaded Rigid or IMC Conduit
  • Removable Cover allows easy access to facilitate wire pulling
  • Furnished with Neoprene Gasket and Cover
  • Rain Tight
SIZE : 1/2" | 3/4" | 1" | 1-1/4"

Radius Elbow

Specification:

Rigid Short Radius Elbow - Rigid Short Radius Elbow used in Tight Areas to Connect 2 Sections of Rigid or IMC Conduit where Full Size Elbows are Too Large.

Rigid Short Radius Elbow features include:

  • For Connecting Rigid Conduit or IMC to an Outlet Box in Tight Radius Applications where a Full Size Elbow Will Not Fit
  • Zinc Die Cast
  • NPT Thread
SIZE : 1/2" | 3/4"

Saddle Connector

Specification:

Flex Saddle Box Connector for AC MC & Flex Conduit - Zinc Die Cast - Flex Saddle Box Connector for AC MC & Flex Conduit - are Used To Connect FMC, AC, MC & Flex Conduit To a Steel Box

Flex Saddle Box Connector for AC MC & Flex Conduit - Zinc Die Cast features include:

  • Use to connect flexible metal conduit, AC, MC and NM sheathed cable to a Steel Box or other Metal Enclosure
  • 3/8" size fits 1/2" knockout
  • End Stopped
  • Combo Head Screws
  • Zinc Die Cast
SIZE : 3/8"

Screw-In-Connector ( With & Without ) Insulated Throat

Specification:

Screw-In Connectors with Insulated Throat for Greenfield/Flex Conduit - Zinc Die Cast - Screw-In Connectors with Insulated Throat for Greenfield/Flex Conduit - are Used to connect Flexible Metallic Conduit to steel outlet box, load center or other metal enclosure

Screw-In Connectors Insulated Throat for Greenfield/Flex Conduit - Zinc Die Cast features include:

  • Use to connect Flexible Metallic Conduit to steel outlet box, load center or other metal enclosure
  • Insulated Throat
  • Assembled with Zinc Die Cast locknut
  • Zinc Die Cast
SIZE : 3/8" | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2"

Screw-In-Coupling Compression Type

Specification:

EMT to Flex Combination Compression Coupling - Zinc Die Cast - EMT to Flex Combination Compression Coupling are Used to join EMT Conduit to Flexible Metal Conduit

EMT to Flex Combination Compression Coupling - Zinc Die Cast features include:

  • Used To Join EMT and Greenfield/Flexible Metal Conduits
  • Compression Termination for EMT and Screw-In for Greenfield/Flexible Metal Conduit
  • Zinc Die Cast
SIZE : 1/2" | 3/4" | 1"

Screw-In-Coupling

Specification:

Screw-In Couplings for Greenfield/Flex Conduit - Zinc Die Cast - Screw-In Couplings for Greenfield/Flex Conduit - are Used to connect 2 Pieces of Flexible Metallic Conduit

Screw-In Couplings for Greenfield/Flex Conduit - Zinc Die Cast features include:

  • Use to connect 2 Sections of Flexible Metallic Conduit
  • Zinc Die Cast
SIZE : /2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2"

Straight Liquid Tight Connector ( With & Without) Insulated Throat

Specification:

Liquid Tight Connectors with Insulated Throat - Straight - Zinc Die Cast - Liquid Tight Connectors with Insulated Throat - Straight are Used to join Liquidtight Conduit to an Enclosure

Liquid Tight Connectors - Straight - Insulated Throat - Zinc Die Cast features include:

  • Terminate and Seal Liquid-tight Flexible Metal Core Conduit to either Oil-tight, Liquid-tight or Rain-tight Box or Enclosure
  • Connectors can be used with Tapered Threaded Female Entry or Unthreaded KO using the Sealing Washer and Locknut
  • Insulated Throat
  • Zinc Die Cast
SIZE : | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 3-1/2" | 4"

Straight Squeeze Connector ( With & Without) Insulated Throat

Specification:

Squeeze Box Connectors Insulated Throat - Straight - Zinc Die Cast - Squeeze Box Connectors Insulated Throat are Used with a locknut to Terminate Steel or Aluminum Flexible Metal Conduit, Armored Cable & MC to an enclosure

Straight Squeeze Box Connectors - Insulated Throat features include:

  • Used with a locknut to Terminate Steel or Aluminum Flexible Metal Conduit, Armored Cable & MC to enclosure
  • Assembled with Zinc Die Cast Locknut & Combo Screws
  • Insulated Throat
  • Zinc Die Cast
SIZE : 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 3-1/2" | 4"

Water-Tight Hub Insulated Throat

Specification:

Rigid Water Tight Hubs - Zinc Die Cast - Rigid Water Tight Hubs are Used To Secure Conduit in an Enclosure.

Rigid Water Tight Hubs features include:

  • To secure threaded Rigid Service Entrance conduit & IMC to box or enclosure in a WaterTight Application
  • Assembled with 221°F (105°C) rated flame retardant Lexan throat insulator and BUNA-N sealing ring that completely encircles knockout to prevent contaminants from entering enclosure
SIZE : 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 3-1/2" | 4"